UKCA and CE marking

 

Navy blue hexagon vector shape with UKCA icon in white to centre

UKCA and CE marking

The UKCA (UK Conformity Assessed) marking was introduced following the United Kingdom’s departure from the European Union. UKCA demonstrates that a product complies with applicable UK legislation and relevant conformity assessment requirements for the Great Britain market (England, Scotland and Wales). For many regulated product sectors, Great Britain continues to recognise CE marking alongside UKCA marking, providing manufacturers with flexibility in how compliance is demonstrated.

Northern Ireland operates under different arrangements and generally continues to follow EU product conformity requirements. Products supplied to the Northern Ireland market typically require CE marking and, in some circumstances, CE marking together with UKNI marking. UKCA marking alone is not generally recognised in Northern Ireland.

Where UK conformity assessment requirements apply, manufacturers must prepare and retain the relevant Declaration of Conformity and supporting technical documentation. These documents identify the legislation, standards and conformity assessment procedures used to demonstrate compliance.

Renderplas PVC beads are manufactured in accordance with all relevant British and European standards. External render beads have been independently assessed by the British Board of Agrément (BBA), which has certified that they satisfy relevant performance requirements and are fit for purpose in external rendering applications.

Scope of Declaration

Harmonised European Standards (hENs) were developed to provide a common technical language and consistent methods for assessing the performance of construction products throughout Europe.

The EU Construction Products Regulation, Regulation (EU) 2024/3110, entered into force in December 2024 and progressively replaces Regulation (EU) No. 305/2011 during a transitional implementation period. Manufacturers are generally required to assess and declare the performance of construction products covered by a harmonised technical specification and make this information available through a Declaration of Performance (DoP). By issuing a DoP, the manufacturer assumes responsibility for the conformity of the construction product with its declared performance.

In Great Britain, many harmonised European standards have been retained as UK designated standards, together with corresponding provisions for UK technical assessments and product conformity requirements.

European Assessment Documents

A full list of European Assessment Documents (EADs) can be found on the European Organisation for Technical Assessment (EOTA) website:

European Assessment Documents (EOTA)

At present, there is no harmonised European Standard (hEN) or European Assessment Document (EAD) specifically covering PVC beads for rendering, plastering or dry lining. These products are generally regarded as accessory components, with responsibility for system performance declarations resting with the provider of the complete render or External Thermal Insulation Composite System (ETICS).

In the absence of a specific hEN or EAD for PVC beads, Renderplas declares product performance against the applicable design standards and independent third-party assessment criteria.

British Board of Agrément Certification

In the absence of a dedicated EAD or product-specific testing standard for PVC render beads, Renderplas has obtained independent certification through the British Board of Agrément (BBA). BBA Certificate No. 11/4823 confirms that Renderplas external render beads have been assessed for suitability in accordance with the principles set out in BS EN 13914-1:2016 – Design, Preparation and Application of External Rendering and Internal Plastering: External Rendering. In addition, the BBA undertakes relevant performance assessments, including impact resistance and pull-off testing, to evaluate the suitability of products for use within construction applications.